See all in category: Square Billets

Square Billets

Inquire about this product

  • Manufacturer: Waterbury Farrell

Continuously Cast Square Billets

We supply high quality Continuously Cast Square Billets of various cross-sections and length meeting the customer requirements and industry specifications including ASTM, BS, EN etc or any other tailor-made requirements of customer. Our Billets can be in alloying and non-alloying qualities for applications like structural and general purpose, concrete reinforcement, wire drawing etc or any special applications (like Low Carbon, High Carbon, Spring Steel, High Mn Steel, Tool Steel, Case Hardening Steel, Cold Heading Quality Steel etc)

Specifications and grades
SI No Standard for Chemical Composition Application
01 ASTM A 36/A 36M, ASTM A 615/615 M Structural and general use
02 B5 4449 Structural and general use
03 EN10425 Structural and general use
04 SAE 1006, SAE 1008, SAE 1010, SAE 1012, SAE 1015 etc under ASTM A 510 M Wire drawing carbon steel/low carbon steel
05 G051 380-94 35P/P5, 5SPRS Structural and general use
06 EN10083, EN 10084, EN 10087 Carbon steel/Alloy Steel for special application
07 ASTM 105, ASTMA 350, ASTAM A 29 Carbon Steel/Alloy Steel for special application
Typical Chemical Composition
%C %Si %Mn %P %S N(PPM) CE*
0.10-0.38 0.15-0.30 0.60-1.40 0.035 MAX 0.035 MAX 120 0.30-0.50
*Note: Carbon equivalent Value =C +Mn/6+(Cr+Mo+V)/5+(Cu+Ni)/15
Size Range
130MMX130MM 132 KG/METER 6-12 METER(-0/+100 MM)
150MMX150MM 175 KG/METER 6-12 METER(-0/+100 MM)
160MMX160MM 196 KG/METER 6-12 METER(-0/+100 MM)
*We have the capability to produce and supply in the size range 100-200 mm though the common standardised sizes are only mentioned above.
Physical Parameters
1 Dimension tolerance ± 2 %
2 Rhombodity 3% Max
3 Diagonal difference ≤ 10mm
4 Corner radius 4 mm Max
5 Straightness Camber 5mm/meter
6 Angular Twist Not more than 1 degree per meter and not more than 6 Degree over 12 meter length.
7 Cutting Both ends will be Flame Cut
8 Identification At the end of each billet cast number and size will be Stamped or hand written
9 Surface The defects like longitudinal cracks, transverse cracks, scab and thick scale, slag patches, surface blowholes etc. will be within acceptable range.